Pair - 2 rings supplied
Upper and lower ring portions precision machined from one solid block of steel to strict tolerances for optimal fit
Heat treated QPQ nitride matte black finish for strength and added weather and wear resistance
Progressively machined for a precise inner ring diameter to achieve optimal tube alignment; grooved inner surface guarantees tube retention
Radiused edges and corners prevent snagging, scratching, or tearing of other gear and give easy access to scope windage and elevation turrets
Locking Torx screws and square-shaped integral recoil stop for a secure zero hold
2 piece ring set, each equipped with 4 top Torx screws; mounting base designed to fit on MIL-STD-1913 rail platform
Includes a T15 Torx wrench for easy fitting
30mm Tube -
Ring is 30mm diameter.
To suit scopes with 30mm diameter tubes.
Low Profile Height -
10mm base to bottom of ring "Saddle" and 25mm center height.
Suit scopes with UPTO maximum 49mm OUTER objective diameter i.e., not the actual lens size.
In practice this means in most cases scopes upto approx. 38mm lens when on a flat base.
However if base is raised or end of scope will be over barrel with more space then larger lens scopes may be used.
This is down to the user to determine we can only give broad guidelines.